Today 2nd of December teachers introduced us the new challenge via video call connected with other schools. For this challenge we mix with other students from Deusto, so we have to take the challenge forward between them and us. The challenge is based in to solve a problem that appears at the workshop of the school. The problem is that the tool holder of the lathe machine doesn't fit with all the tools that are used for machining, so we have to define a solution for this problem.
Today we are beginning to collaborate with the Salesian school. The first thing we did was to
get some ideas to start with the project and start taking the corresponding measurements of
the tool holder and turret.
We began to make video calls with the Salesian group and to clarify the doubts we had in the
project. With these video calls we start to clear up those doubts and we start to have a better
communication.
On Wednesday we started classes with julen, from Monday we had started the challenge with another center, so we were not instead of making catia, we finished the sketches we had to deliver on Thursday, then with nagore we made a video call to decide how to finish the documentation of the sketches and how to assemble the two parts of the lathe. Also with nagore we had examination of the measuring machine, from 11:00 to 13:00.
On thursday we started doing a video call with Salasianos to talk about what we done during the week, and what we Will do the next week. After the break we had class with Iranzu, and she started talking to the group to say how the project was done, and then we continue working because this a day, was the day to deliver the HITO 1.
On thursday we started doing a video call with Salasianos to talk about what we done during the week, and what we Will do the next week. After the break we had class with Iranzu, and she started talking to the group to say how the project was done, and then we continue working because this a day, was the day to deliver the HITO 1.
