VII WEEK

21-26 Oct The seventh week, we started with a Catia exam. The exam was based on doing a part with mechanical design coping from a plane teacher gave us. It can say that the part we had to draw it had one first part easier than the other, the base of the piece was quite easy, but the piece gets difficult when we were drawing the second part that were like two straight ears that came out from a cylinder. The second part of the exam was to improve the template we had done in class by inserting a box for the plane number.

On Tuesday we continued increasing the tree in CATIA with Gaizka, we started to create new reference planes. From 9:00 a. m. to 10:00 a. m. we had a talk about blood, and we were proposed to go on Wednesday to draw blood. Then we had a meeting with Gaizka to see the progress we have made on the project and Gaizka has come to the good conclusion of our project and has proposed some things to improve the project.

On Wednesday, first thing in the morning we had class with Julen, we did the review of the piece that put us in the CATIA examination, then taught us to make gears, then taught us to add parameters to the piece to edit the measurements.

Then with Nagore we did the AMFE of the strip design in groups , and finally with Iranzu, we continued doing the market study, the brain storming and showed us the market study carried out by the students of machining intermediate degree.

On thursday we started with Julen doing Catia, and as always we started doing a piece to practice for the challenge. Today we learnt something new in Catia that I think that it would help us a lot in the future. With Iranzu we continued doing the market study and we finish the work because we have to deliver tomorrow at 3pm. 

Then after the break we continued doing the desing tree, because we had to put where the columns and the bushes are located in the tree then to make the die, because if we fail that it can be that the die doesnt work.